Setting up ATG on DC-700 Series

Automated Tank Gauging (ATG) systems are devices used to monitor and manage the contents of fuel storage tanks. ATG systems deliver accurate, real-time data on volume, levels, and other critical parameters, enabling efficient fuel inventory management, leak detection, and streamlined delivery scheduling. The ATG device connects to the Petrosoft platform via the DC Box over a local network.

We provide fuel monitoring data support for the following ATG brands and models:

• Franklin EVO-400
• Franklin EVO-550
• Pneumercator TMS-3000
• Site Sentinel TS-504
• Veeder Root TLS-350
• Veeder Root TLS-250
• Veeder Root TLS-200

ATG auto discovery

The DC Box detects compatible ATG devices on the local network and automatically sets up the connection for fast integration. ATG auto discovery starts during DC Box activation and works in the background.

If the ATG device is detected but inventory readings are not received, or if no ATG devices are found, you can manually configure the connection settings to resolve the issues.

Manual ATG setup

If the DC Box is unable to automatically configure the ATG connection during activation, you can manually set up the connection using the DC Box activation wizard. Simply follow the on-screen instructions to enter the necessary details, such as the device model, access credentials, and network parameters. The wizard will guide you step-by-step.

If the ATG device is detected but inventory readings are not received, all discovered information will be saved for future use and automatically populated in the activation wizard fields for easier manual configuration. The DC Box will display an error message detailing the issue and highlight the relevant fields that require attention.

1. Choose the ATG device model.
2. Provide the local network connection information:
• IP address of the ATG device in the local network.
• Network port (TCP) of the ATG device.
• Password used to access ATG device data.
• If needed, expand the Advanced settings section and change the default subnet mask in the Network mask field.
3. Click the Test Connection button to check the correctness of ATG connection settings and save the configuration. If an issue occurs, the wizard will display an error message explaining the problem and highlight the fields that need to be addressed.

If you are unsure about the ATG configuration at this moment, you can skip ATG setup by clicking the Do not connect ATG button and complete the configuration later. All previously configured parameters will be saved, allowing you to resume the configuration from where you left off.

You can also configure ATG connection settings under station options in CStoreOffice®.

Checking ATG connection status

The current state of the ATG device is shown as an icon next to the Automated Tank Gauge.

• ATG device model: The ATG device has been successfully connected, and the system is now receiving fuel inventory readings from it.
• "Not Connected": The ATG is missing or the automatic discovery failed for any reason. Try to configure the device manually.
• Rotating indicator: The ATG auto discovery is currently in progress.