PayTerminal Settings
This tab is available only if you select a payment terminal in the list of connected devices on the System tab.
On the PayTerminal tab, you can specify settings for the payment terminal connected to the SmartPOS device.
The payment terminal settings depend on the device type:
Injenico iSC-350
Enter the IP address of the payment terminal.
PAX SP30 and PAX MT30
- PIN Pad IP Address: Enter the IP address of the payment terminal.
- Use digital signature capture: Enable this option to use the digital signature capture feature on PAX terminals. PAX terminals allow accepting physical and digital signatures for credit card transactions. With digital signature capture enabled, customers get an ability to sign their credit card receipts on the mobile device. Once the transaction is complete, the PAX terminal prints a receipt verified with the digital signature.
Wayne Fusion
- EPS: Specify connection settings for the payment terminal: IP address, point of payment identifier (POP ID), device and service waiting ports (by default, 4004 and 4005) and timeout response—the maximum time for waiting for response from the payment terminal (by default, 240 seconds).
- Site Assets Data: Specify site configuration data provided from fusion via EPS: site brand, site name, site ID and site contact information, including address, city, state, ZIP code and telephone number.
Injenico iSC-250
Specify the payment terminal hardware serial number (Pin Pad HSN), merchant ID (MID), CC login and password.
Viper EPS
Specify the IP address of the payment terminal, point of payment identifier (POP ID), device and service waiting ports (by default, 4004 and 4005) and timeout response — the maximum time for waiting for response from the payment terminal (by default, 240 seconds).
Cayan Genius
- Device Settings: Specify the Genius-powered PIN pad settings: IP address, port over which the PIN pad must communicate with SmartPOS and the device POP ID.
- Merchant Settings: Specify the Cayan account credentials: merchant name, merchant site ID and merchant key. If automatic batch closing is enabled for the Cayan merchant account, select the Batch settlement on host check box.
To check the connection to the host, press Payment Network Test. If this button is not available, ensure that you use EPS PIN pad on your device (check System > Payment Terminal).
After you specify and save the payment terminal settings, SmartPOS checks if connection to the payment terminal can be established. If the terminal is connected, SmartPOS displays the Ready status on the General tab in the Payment Terminal field.