CStoreOffice® Support & Learning

Hardware Settings

When you launch SmartPOS for the first time, it automatically detects connected hardware devices and displays them in the Devices list.

To refresh the status of all connected devices, press the refresh button.

The following devices can be connected to SmartPOS:

  • System unit: If the SmartPOS Model 100 (AdvantexSP0100) is automatically detected at the first launch, this list box becomes unavailable for editing.
  • Printer
  • Customer Display: Select the resolution of the customer display corresponding to the physical size of the connected display.
  • If you upload the ads image from the back-office side to be shown on the customer display, ensure that the image size is adjusted to the display size.

  • Scanner: The following models of Advantex barcode scanners can be connected:
  • SC-800i Magellan
  • SC-0056
  • SC-2400 Wireless
  • SC-2430
  • SC-6300: Is displayed automatically when the BaoShare EP-6300 barcode scanner is connected.
  • SC-0056
  • SC-8602
  • Payment Terminal: The following models of payment terminals can be connected:
  • Cayan Genius
  • Injenico iSC-250
  • Injenico iSC-350
  • PAX A35
  • PAX A80
  • PAX Aries 5
  • PAX Aries 8
  • PAX MT30
  • PAX S300
  • PAX SP30
  • Viper EPS
  • Wayne Fusion
  • When you set up SmartPOS for the first time or press the Refresh button, SmartPOS automatically discovers PAX payment terminals in the network. The first detected terminal is displayed at the top of the Payment Terminal list and selected by default. The terminal settings such as IP address are automatically populated on the Payment Terminal tab.

    Other terminals detected in the network are displayed in the list as well. Select the necessary payment terminal from the list if needed.

  • Forecourt Controller: You can set up a forecourt controller when the Fuel module is turned on at the back-office side.