Fuel Settings

On the Fuel Settings tab, you can manage the following settings of the fuel controller (Fusion):

• Register ID: Enter the register ID of the fuel controller. The ID must be in a range of 1 to 999.
• Controller Login: Enter the controller login in case the Verifone controller is used.
• Controller Password: Enter the controller password for communication with the fuel controller.
• Transaction Service Password: Enter the password to the fusion transaction service for uploading the outdoor transactions data from Fusion and displaying them on the History tab.
• IP Address: Enter the IP address of the fuel controller.
• Port: Enter the port number of the fuel controller.
• Max Authorization Amount
• Prepay Only Mode: Select this check box to switch to the Prepay Only mode. In this mode, the Authorize button is unavailable for the selected pump on the cashier's screen.
• Sound for "Calling" pump: Select this check box to enable a sound signal for authorization requests coming to SmartPOS. This option is useful for gas stations operating in the consent mode. In the postpay fueling mode, when a customer puts the nozzle up, the cashier will get a sound signal at the terminal notifying that the pump can be authorized. The signal duration is 30 seconds or until the cashier authorizes the pump.
• Service level: Depending on the model of the forecourt controller, select service level(s) for a pump.
• Self Service: The client fills up his/her car with fuel and pays for the fuel him-/herself.

The pump in the Self Service mode is available for outdoor transactions only.

• Mini Service: Minimum service level, the station's personnel only fill up the client's car and/or provide other minimum services.
• Full Service: The station's personnel provide the whole complex of fueling services.

At least one service level option must be selected.

• Car Wash Module: Select this check box to enable the Car Wash Module on SmartPOS.

  If the car wash facility is available at the station, enable the Car Wash Module option at all POS terminals. In the opposite case, the Car Wash functionality will not function properly.

To apply the changed settings, press Save.

To synchronize the fuel settings with Fusion, press Sync Data with Controller.