Getting Started with CipherLab 9700

Before you start with CipherLab 9700, learn the following sections:

• Device Characteristics
• Before First Use
• Rebooting Handheld
• Training and Help

Device Characteristics

The CipherLab 9700 scanner box is shipped with the following items:

• Mobile Computer (CPT-9700)
• USB Cable
• Dock
• Rechargeable Li-ion Battery Pack
• Stylus

The CipherLab 9700 scanner has the following characteristics:

• Windows CE 6.0 OS
• TI OMAP3730 1GHz CPU
• 4GB HAND flash memory
• 512MB SDRAM
• 802.11a/b/g/n wireless support
• Storage expansion: Up to 32GB MicroSDHC, no SD card required

Before First Use

To use the CipherLab 9700 scanner first time:

1. Plug the USB cable into the dock and the PC.
2. Plug power into the dock and into an outlet.
3. Install the battery into the handheld.
4. Place the handheld on the dock.

Please charge the CipherLab 9700 device for at least 8 hours before first use.

For more information, refer to the CipherLab’s manufacturer documentation.

Rebooting Handheld

To reboot the handheld:

1. Take the handheld off of the dock.
2. Press and hold the red power button for a few seconds.
3. On the handheld device’s screen, click Warm Boot.
4. Once it is completely booted up, place the handheld on the dock.

Training and Help

You can watch recorded Handheld training which is available in the Petrosoft University Portal here.

In case of any questions, please call 412-306-0640 or submit a ticket via CStoreOffice® web site.