Setting Up Verifone Commander Loyalty Route for Sunoco with Mako MNSP

To set up Verifone Commander loyalty route for Sunoco with Mako MNSP:

1. Open the Verifone console and log into it.
2. In the main menu, go to Initial Setup > Local Area Network Configuration.

   

3. In the One-Time Password window, generate a One-Time Password (OTP) on your commander and enter it into the field.

• For Full Commander, the code will be displayed on the front LCD panel.
• For RubyCI, the code will be displayed on the bottom right LCD panel in two sets of 2. The first set will be separated by a period.

  

  Result: After the One-Time Password is generated and entered in the One-Time Password window, the Local Area Network Configuration form opens.

4. In the Local Area Network Configuration form, go to the bottom and click New.

   
   Result: The New Route Config window opens.

5. In the New Route Config window, enter the following data:

• In the Route Type list, select Network.
• In the Destination field, enter 192.168.87.0.
• In the Gateway field, enter 192.168.31.31.
• In the Netmask field, enter 255.255.255.0.
• In the Service field, enter Petrosoft Loyalty.

  

6. To apply the changes, reboot the site Controller: Commander or RubyCI.

   

7. Check the connection status. From the main menu, go to Tools > Helpdesk Diagnostics > Payment.

   
   Result: The Payment Status form opens.